When switching from the old style oval MAF sensors to the newer drop in slot (blade) type you will need change the sensor connector. This is the Ford OEM replacement pigtail used for the new style MAFs

BOC Switch Chip Control Box

5.0L 4V 412 HP CONTROL PACK - FRPP M-6017-A504V

Ford Racing Performance Parts 90mm Lighting MAF

Need to relocate your IAT sensor or changed to the new style? These pigtails are OEM direct replacements for the new style IATs.

Factory replacement OEM Intake Air Temperature sensor, push in type.

Factory replacement OEM Intake Air Temperature sensor, threaded. Direct replacement for the Lightning.

Lightning / Cobra Intercooler Water Pump Pigtail

Plug and play late model 4 Pin MAF jumper makes swapping in a new MAF a breeze. No longer is there a need to cut up your stock wiring harness or miss match wire leads with this jumper.

Upgrading to a late model MAF will require a new MAF connector in some vehicles. This pig tail is for those using a 96 - 02 Ford 4 Pin MAF or installing a Ford Lightning MAF.

Plug and play late model 6 Pin MAF jumper makes swapping in a new MAF a breeze. No longer is there a need to cut up your stock wiring harness or miss match wire leads with this jumper.

Upgrading to a late model MAF that uses 6 pins and the integral IAT sensor will require a new a connector in some vehicles.